Magnum MS PAE 120/240V Inverter Specifications

The MS PAE Series is a pure sine wave inverter designed specifically for split phase 120/240V renewable energy applications. The MS-AE produce 120/240 volt output in one inverter, eliminating the need to stack two inverters together to obtain 240 volts output and are ETL listed to the stringent requirements of UL 1741 and CSA STD C22.2 No.107.1-01 for renewable energy installations.

No series stacking required! The unique design of the MS-PAE Series can provide 120 and 240 volts output in one unit, eliminating the need to stack two units together to produce 240 volts.

Up to four inverter/chargers can be parallel stacked to produce up to 17.6kw of power at 120/240V. MP panels and router are required for parallel stacking the MS-PAE Series.

A Power Factor Corrected (PFC) charger is built in and uses less energy from a generator than a standard charger, using 25-30% less AC current than standard chargers.

The MS-PAE Series is ETL Listed to the stringent requirements of UL 1741, 1st edition, and CSA C22.2 #107.1-01 for renewable energy installations.

	MS4024PAE	MS4448PAE
INVERTER SPECIFICATIONS
Input battery voltage range	18 - 34 VDC	36 - 64 VDC
Nominal AC output voltage	120/240 VAC split phase (± 5%)	120/240 VAC split phase (± 5%)
Output frequency and accuracy	60 Hz ± 0.1 Hz	60 Hz ± 0.1 Hz
Total Harmonic Distortion (THD)	< 5%	< 5%
1 msec surge current (amps AC)	Line-Neutral: 120, Line-Line: 70	Line-Neutral: 120, Line-Line: 70
100 msec surge current (amps AC)	Line-Neutral: 72, Line-Line: 40	Line-Neutral: 75, Line-Line: 40
5 sec surge power (real watts)	5800	8500
30 sec surge power (real watts)	5200	6000
5 min surge power (real watts)	4800	5400
30 min surge power (real watts)	4500	4800
Continuous power output at 25° C	4000 VA (L-L)	4400 VA (L-L)
Maximum continuous input current	266 ADC	144 ADC
Inverter efficiency (peak)	0.93	0.94
Transfer time	16 msecs	16 msecs
Search mode (typical)	< 6 watts	< 6 watts
No load (120 VAC output, typical)	27 watts	25 watts
Waveform	Pure Sine Wave	Pure Sine Wave

CHARGER SPECIFICATIONS
Continuous output at 25° C	105 ADC	60 ADC
Charger efficiency	0.85	0.85
Power factor	> .95	> .95
Input current at rated output (AC amps)	15 AAC per leg at 120/240 VAC split phase	17.5 AAC per leg at 120/240 VAC split phase

GENERAL FEATURES & CAPABILITIES
Transfer relay capability	2 legs at 30A per leg transfer standard on all models
Five stage charging capability	Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
Battery temperature compensation	Yes, 15 ft Battery Temp Sensor standard
Internal cooling	0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection	Yes, with two overlapping circuits
Overtemperature protection	Yes on transformer, MOSFETS, and battery
Corrosion protection	Yes, PCB’s conformal coated, powder coated chassis/top, and stainless steel fasteners
Listings	ETL Listed to ANSI / UL1741 and CSA STD C22.2 No.107.1-01
Warranty	Three years parts and labor (five years when installed on MMP or MP system)

PHYSICAL SPECIFICATIONS
Dimensions (l x w x h)	13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm)
Mounting	Shelf, wall (no vents on bottom), MP or MMP panels
Weight	55 lb (24.9 kg)	55 lb (24.9 kg)
Shipping weight	62 lb (28.2 kg)	63 lb (29.6 kg)
Max operating altitude	15,000’ (4570 m)
Temperature (Operating/Non-operating)	-20° C to +60° C (-4° F to 140° F)
Temperature (Non-operating	-40° C to +70° C (-40° F to 158° F)
Operating humidity	0 to 95% RH non-condensing

Contact Us: Telephone: toll free at 1-888-810-4709 Parry Sound,Northern Ontario,Muskoka and Georgian Bay
Send mail info.stratenergy@gmail.com with questions or comments about our product or web site.